Toilet blockages can happen in the most inopportune moments, thereby leaving you with nothing but disappointment and annoyance. While calling for professional help is always on the card, you can also step in to do the necessary measures to unblock the toilet. In this article, we will discuss how to free the bathroom quickly and efficiently. Additionally, we will also mention tips on how to prevent your toilet from getting blocked.
Using a plunger is the most common way to unclog the toilet. Then there is the residential plumbers’ rod as well. But if you don’t have either of the two, you can still carry on with the task at hand.
1.) With Hot Water: More often than not, the plumbing accumulations cause the water blockage inside our toilet. One of the easiest ways to address this situation is with hot water. You should pour hot into the toilet bowl and wait for a few minutes before hitting the flush knob. The hot water will help in softening the waste inside and push eventually to clear the drainage.
2.) Without A Plunger: If the earlier option did not work for you, fret not. It’s time now for you to get your toilet plumbing gloves on. You will have to use your hands and try manually to deal with the blockage. There are chances that you will get excess toilet papers or some organic waste that did not pass through the drains. Once you feel like the passage is clear, hit the flush knob again.
3.) With Wire Hangers: While drainage rods can be very effective in this case, you might not own one. Hence, you can use either of cloth hangers or stiff wires to unclog the toilet. You will have to careful, though, while moving it around as it might get lodged or scratch the ceramic surface instead. Once done with the wires, hit flush and check if the blockage is addressed.
4.) Into the Toilet Pipes: If you are still not succeeding with the job, may you are just trying at the wrong place. It might just be that the blockage is not in the toilet bowl, but the pipes. While getting a good look at the lines can be difficult, addressing the issue is relatively easy. Its best recommended using a residential plumber’s rod or toilet unblockers for this purpose- a common tool for this kind of DIY project. Alternatively, you can try out cloth hangers as well to sort out the pipes.
5.) With Vinegar and Baking Soda: One of the most simple and easy ways to unblock the toilet is by using vinegar and baking soda. You will have to take bits from both vinegar and baking soda and pour it into your toilet. It would help if you allowed some time for, preferably, a good twenty minutes. Eventually, hit the flush and see if the blockage has cleared.
Toilet blockages are very common across residential houses as well as big commercial spaces. If you are looking for some toilet plumbing assistance, you must visit Platts Plumbing.